HP ap5000 All-in-One Point of Sale System

Processors

• Intel Celeron 440
• Intel Core 2 Duo E7400

Chipset

Intel Q965 Northbridge with ICH8R Southbridge

Graphics

Integrated Intel Graphics Media Accelerator 3000

Display

15 inch diagonal TFT dual-bulb display, 1024 x 768 resolution, with 5-wire resistive type touchscreen, liquid and dust resistant up to IP55. Precalibrated at factory but should be recalibrated after initial software via the calibration wizard. Can use stylus, finger tip, finger nail, or credit card edge to perform touch

Memory

Dual-channel

DDR2 up to 4GB DIMMS, 2 slots, supports 667/800 MHz; most configurations ship with 1 x 2GB or 1 x 1GB + 1 x 2GB (3GB)

NOTE:

DDR 2 800 MHz will clock down to 667 MHz.

NIC

Realtek RTL8111C Ethernet Connection, 10/100/1000, with WOL support

Keyboard

PS/2 or USB supported (not included).

NOTE:

A keyboard is required to unbundle the software image.

Pointing Device

USB supported (not included)

Magnetic stripe reader (MSR)

Multi-channel, fully integrated MSR, confirms to ANSI/ISO 7810, 7811 1/5, 7812, and 7813; supports OPOS driver layer; 3 tracks: IATA, ABA, THRIFT; bi-directional swipe; LED indicates status of reader

Vacuum Florescent Display (VFD)

2 line x 20 character display (40 characters total), RS232 interface, DC5V (COM port set to 5 V at factory in BIOS setup). Supports complex character set, control commands, user-defined fonts and international fonts. Display pitch adjustment only (10deg to 90deg), no height adjustment.

   WARNING:

Display must only plug into COM 1 or COM 2 (not COM 3 since COM 3 does not support DC5V).

Storage

• Hard Drive – (2) 2.5 inch internal hard drive bays: 160GB 2.5 inch (select models), 64GB solid sate 2.5 (some models) inch
• Optical Drive – External USB only (not included)

  NOTE:

  An optical drive is required to restore the software image.

Audio/Visual

Intel integrated high-definition audio with 2-channel Via VT1708S codec

Power Manager

Advanced Configuration and Power Management Interface (ACPI).

• Allows the system to wake from a low power mode.
• Controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system.

NOTE:

Power button is located on I/O panel and concealed under the I/O cover.

SMBIOS

System Management BIOS, previously known as DMI BIOS, for system management information

Security

Kensington Lock Support, BIOS TBD

Power Supply

130 W ac power adapter, ENERGY STAR 5.0 qualified, European Union 2005/32/EC (EUP LOT 6, EUP LOT 7), input 90 to 260 V ac; Frequency range 47 to 63 Hz

Wall mounting

Mount will allow the ap5000 to be mounted on the wall and It will be sold as AMO (BT390AA) and would include the mount (metal plate), screws, and molly bolts

622311-001

Advertisement panel

This non-electrical panel features a clear cover. It may be removed so that print material/advertisements can be displayed. HP provides a template for the advertisement panel.

Service and Support

Standard 3/3/3 parts and labor and on-site service, two-year manufactured lifecycle but support available up to five years, OS support for 90 days; quick restore solution included (requires external optical drive/not included)

Compact Flash

1 slot, support compact flash type II

USB 2.0

5 (located at bottom of main display behind access panel), 1 left side (behind access panel)

Audio line out

One

Microphone in

One

Power connector

DC 19 V for 130 W ac power adapter

RJ-45/Ethernet

One

RS232 ports

Com 1 and 2 (5 V configurable in BIOS), Com 3 (12 V configurable in BIOS)

USB and power

24 V

Keyboard (PS/2)

One

Parallel port

One

Operating system

• Microsoft Windows XP Professional (for a limited time only)
• Microsoft Windows 7 (32-bit)
• Microsoft Embedded POS Ready 2009
• POSReady 7 (32-bit or 64-bit)
• FreeDOS

Software

McAfee Total Protection, PDF Complete, HP Client Automation Agent (Windows 7 and XP only)